Azimut 45

New yacht on order 2021 Italy 0
Pricein Europe: VAT
Length overall
13.78m
Engine
2 x 480 hp (360 kW) Cummins QSB 5.9
Beam overall
4.38m
Material
VTR/GRP
Engine hours
0m/h
Download this offer in PDF
Do you have questions regarding this yacht?
Azimut Yachts Russia
Leasing for new yachts. Sea-trial.

For EU business holders we assist in leasing. Malta leasing provides conditions with up to 3% efficient VAT.

It is also possible to visit, watch and seatrial this model on the shipyard in Italy.

Please, contact us to get more information.

Options

Additional options

Standart specification

Structure and shape of hull

The structural design of the hull has been approved by RINA (EC approval category B). This guarantees the structural quality which is enhanced
by the use of innovative materials and technologies.
The hull and all the superstructures (deck, deckhouse, flybridge) have been built using the infusion technique. This construction technology reduces weight and, at the same time, improves construction control and quality. Bow and engine room trays: these are structural trays made through infusion. The key element of this transformation
is the increasingly widespread use of the latest structural adhesives (replacing the traditional clamps).
Fiberglass structures using multiaxial fabric with a powder binder. Neopentilic and isophtalic spray gelcoat. PVC foam is used for the sandwich panels on the hull, deck and superstructures. The engine room and bow anticollision structural bulkheads are made of PVC infused sandwich.
The structural calculations have been checked using FEM analysis. FEM models were generated for the hull structures. This calculation system is used in the aeronautical and car manufacturing sectors. It allows us to simulate the behavior of a boat under extreme conditions, accurately checking the levels of stress and deformation.
DCPD resin was used for the internal layers of the hull and for the superstructures.
Vinylester resins were used for the external layers of the hull (resistance to osmosis and staining, print through). AZIMUT is therefore able to provide a 5-year warranty against osmosis.

Propulsion system component characteristics
Engines
  • Manufacturer CUMMINS
  • Model QSB 6.7 480 Hp
  • Type Diesel engine
  • Max. power kW 353
Reduction gears/marine gears
  • Manufacturer CUMMINS
  • Model ZF 85 - IV
  • Reduction ratio 2.49:1
Transmission
  • Configuration shaft line - V drive
  • Shaft length 2,940 mm
  • Shaft angle 11°
  • Shaft diameter 55 mm
  • Distance between centers 1,240 mm
  • Building material MARINOX 17
  • Support Brass axle supports
  • Hull casing with PSS seal
Propellers
  • Model 4 blades
  • Building material NiBrAl
  • Diameter 660mm
  • Pitch 855mm
  • Profile C-Foil 87
Steering system
  • Rudders: Round profile in satin brass
Flybridge
  • Can be accessed from the left side of the cockpit via a 7-rung GRP ladder.
  • Access door: hinged opening with hatchway in aluminium and Plexiglas.
  • Skylight for direct communication with internal room.
  • Smokey Plexiglas windbreak with stainless steel frame
  • Flybridge layout with fore sundeck. The aft area can be configured in three versions - C, L, All sundeck, thanks to the modular benches kit.
  • Navigation lights
  • The wheelhouse includes:
  • Pilot console
  • Adjustable helm seat
  • Rudder
  • 12V socket
  • Controls for: engine ignition, bow anchor winch activation, audible alarm
Deck and cockpit
  • 1000W winch
  • Anchor winch controls
  • Chain locker with drainage
  • TREFOIL 21KG GALVANIZED STEEL anchor
  • 65-meter high-resistance gaged chain, diameter 10mm
  • Bow roller and fore winch.
  • Stainless steel oval bitts at fore and center of boat
  • T-head bitts and chocks astern.
  • Swimming ladder
  • Step on "cigars" for side access
  • Entrance to cockpit from left side.
  • Cockpit bench with cushions, for 4 people
  • Lockers under the bench cushions, lockers under the right and left bitts.
  • Shore power socket locker and right deckhouse column locker
  • Locker below flybridge accommodation ladder and bottle-holder next to bench
  • Stainless steel pulpit on side washboard
  • Chocks on the washboard
  • 2 windscreen wipers for the fore windscreen.
  • Tempered glass windows glued to the surrounding structure without any metal frame
  • Diesel and fresh water refills on side walkways
  • Black water tank discharge outlet on side walkways
  • Hatchway (emergency exit)
  • Hydraulic lift platform with 330kg capacity
  • Installable tender:
  • - PLATFORM DIMENSIONS: 3.2 x 1.05m
  • - WORKING DIMENSIONS OF PLATFORM: 3 x 1m
  • - LIFT PAYLOAD EXCLUDING GRP, TEAK AND LADDER: 380Kg
  • - HYPOTHETICAL PLATFORM TENDER: 2.8 x 1.5m
  • - HYPOTHETICAL WILLIAMS TENDER: 285 (*)

(*) A Williams tender is possible but not recommended due to the excessive heaviness in the stern when the boat is fully loaded

Wheelhouse
  • Pilot console
  • Helm seat
  • Rudder
  • Magnetic compass
  • 12V socket
  • Controls for:
  • - Engine start-up
  • - Bow anchor winch activation
  • - Audible alarm
  • - Navigation light activation
  • - Windscreen washer activation
  • - Activation of bilge pumps
  • - Emptying of black and gray water tanks
  • - Engine room ventilation
  • - Diesel level gage
  • - Fresh water level gage
  • - Black water level gage
  • - Gray water level gage
  •  Grabrails for ladder descent
Saloon
  • Saloon with L-shaped sofa and movable pouf on the right.
  • 2-seater sofa with low cabinet on the left.
  • Both sofas (right and left) contain lockers
  • Foldaway saloon table
  • Furnishings in marine plywood with honey-colored oak essence finish. Wardrobe interior in natural cedar-wood. Bed structure, floorboards and locker interior in marine plywood coated with transparent sealer.
  • Large side windows, stainless steel door with 2 panels (1 sliding), skylight for communication with flybridge, and manually opened window (vertical sliding) on steering gear side.
  • Carpeted floor
  • Halogen lighting
Galley
Galley (port side, in the middle of the boat)
2-cabin layout
  • Galley below deck with 3.20m of top in synthetic marble  large storage compartment inside the central base unit 720x630mm  openable circular porthole  rectangular sink ceramic glass range with 3 plates
  • Galley hood
  • 165-liter fridge
  • combined oven up to 20 lt
  • Furnishings and floor in honey-colored oak essence
  • halogen lighting
  • bottle-holder behind sink, in the porthole recess
Galley (port side, in the middle of the boat)
3-cabin layout (OPT)
  • Galley below deck with 2.50m of top in synthetic marble openable circular porthole  rectangular sink ceramic glass range with 3 plates
  • Galley hood
  • 165-liter fridge
  • combined oven up to 20 lt
  • Furnishings and floor in honey-colored oak essence halogen lighting bottle-holder behind sink, in the porthole recess
Owners cabin
Owner's cabin (bow), 2-cabin layout
  • Central double bed with drawer unit hatchway on ceiling for access to bow sundeck at side of shelves object-holder compartments large, openable, rectangular windows
  • Vanity table on the left side, with openable circular porthole removable pouf
  • Right-hand wardrobe with hanger bar
  • Left-hand wardrobe with shelves Furnishings in marine plywood with honey-colored oak essence finish. Wardrobe interior in natural cedar-wood. Bed structure, floorboards and locker interior in marine plywood coated with transparent sealer.
  • Carpeted floor
  • Halogen lighting
Owner's cabin (bow), 3-cabin layout (OPT)
  • Central double bed with drawer unit 
  • Hatchway on ceiling for access to bow sundeck 
  • At side of shelves object-holder compartments 
  • Large, openable, rectangular windows
  • Wardrobes on right and left
  • Furnishings in marine plywood with honey-colored oak essence finish. Wardrobe interior in natural cedar-wood. Bed structure, floorboards and locker interior in marine plywood coated with transparent sealer.
  • Carpeted floor
  • Halogen lighting
VIP cabin
  • Located on the starboard side, in the middle of the boat.
  • Diagonal double bed that can be transformed into separate beds by removing the central part of the mattress.
  • Large 3-module window with an openable circular porthole on one side.
  • Lockers beneath the bed open wardrobe with hanger bar and shelves.
  • Furnishings in marine plywood with honey-colored oak essence finish. Wardrobe interior in natural cedar-wood. Bed structure, floorboards and locker interior in marine plywood coated with transparent sealer.
  • Carpeted floor
  • Halogen lighting
Port side guest cabin (OPT)
  • Overlapping berths openable circular porthole halfway along the cabin personal wardrobe with hanger bar.
  • Furnishings in marine plywood with honey-colored oak essence finish. Wardrobe interior in natural cedar-wood. Bed structure, floorboards and locker interior in marine plywood coated with transparent sealer.
  • Carpeted floor
  • Halogen lighting
Owner's head and Guest/main head (starboard)
  • TECMA toilet
  • Services on the starboard side, with circular shower enclosure - 2 doors, diameter 840mm wall unit with 2 sliding panels with mirrors above washbasin openable circular porthole floor in honey-colored oak essence
  • Head accessories
  • Owner's head with exclusive access from owner's cabin
  • VIP head with access from VIP cabin or from corridor.
Electric system
Voltage levels on board:
  • The voltage levels on the boat are as
  • follows: 230V AC - 50Hz, 24V DC, 12V DC
  • The main electric panels are installed in the engine room
  • Junction boxes are installed in all areas.
Shore power sockets
  • 1 shore power socket - 230V, 50Hz
Batteries
  • 6 batteries AGM 90 AH - 4 for services and 2 for engine start-up
  • 1 battery AGM 50AH 12V for the generator
  • 1 battery charger 12V 10A for generators
  • 1 BATTERY CHARGER 24V-50A 115V-
  • 230V for service and engine start-up batteries
Lights and sockets
  •  24V lighting: halogen spotlights on ceiling, control dimmer for light adjustment, emergency lighting and ceiling lamps
  •  AC sockets: 230V main halogen lighting
  •  DC sockets: 12V (cigarette lighter type)
Electronic navigation instruments
  •  For STD equipment, see the paragraphs on flybridge instrument board equipment and internal instrument board equipment
  •  For a detailed list of alternative/additional equipment available, please refer to the Optionals price list
Bilge system
  •  2 automatic motor pumps 24V, capacity 224L/min, in the cabin area and engine room
  •  2 manual pumps BP9013 WHALE GUSHER URCHIN + MH0350 HENDERSON COMPAC 50 in the cockpit and VIP cabin.
Fire extinguishing system
  • 1 powder extinguisher with nozzles,
  • 12kg, on the engines and marine gears
Fuel system
  •  2 steel tanks with a capacity of 650 l each, located in the engine room; interacting, with a manual valve on each one
  •  Electronic level gage in wheelhouse for port diesel tank
  •  Optical level gage on starboard diesel tank
  •  Filling on each walkway, and venting on the bulwarks 2 single filters
Fresh water system
  •  PE 500 lt tank beneath fore tray, towards the middle of the boat
  •  Level sensor with electronic gage in wheelhouse
  •  Filling on the starboard side walkway
  •  LT 40 SIGMAR COMPACT water heater 220V-800W
  •  Pressure pump
  •  Hot and cold water in all the bathrooms, galley and platform shower head
  •  Cold water in engine room
  •  Fresh water toilet flushing
Black water system
  • 1 tank, capacity 140 lt, in area below tray
  • Level sensor - tank drainage is controlled manually from the wheelhouse
  • Vent on bulwark, with anti-odor filter
  • TECMA toilet with macerator pump
  • Drainage from pier, on starboard side walkway
Gray water system
  •  Water drainage into tank (capacity 140 lt) in the middle of the boat, below the tray
  •  Level sensor with automatic pump and alarm control from the wheelhouse
  •  Water drainage via GULPER 220 membrane pump
Seawater system
  •  Engine cooling with 2 dynamic 2" seawater intakes with filter and valves
Ventilation/extraction
  •  Engine room: 
  • - Natural air intake through air duct with water separator (1 each side)
  • - Forced ventilation: 2 in-line extractors, 24V, 4" (1 per side)
Engine room (other)
  •  Submerged discharge system with minimum external by-pass
  •  Stainless steel drainage manifolds
  •  Structural mufflers in GRP
Other systems
  •  24V electro-hydraulic pump for trim tabs
  •  24V electro-hydraulic pump for gangway and swimming platform
  •  Manual-hydraulic pump for steering gear
Air conditioning system (OPT)
  • CONDARIA cooling system for air conditioning (water system), World version - 42,000 BTU
  • 1 compressor in engine room
  •  FANCOILS:
  • - 16,000 BTU for the saloon
  • - 16,000 BTU for the wheelhouse area and windscreen
  • - 9,000 BTU for the owner's cabin
  • - 6,000 BTU for the VIP cabin  for the saloon, a single panel for managing all the fancoils  for the cabins, 1 panel for each room
Equipment
  •  1 boathook
  •  6 fenders
  •  Mooring lines (5 pieces of 12m each, 20mm in diameter)
  •  Fender lines (6 pieces of 3m each, 8mm in diameter)

Layouts

Flybridge Azimut Flybridge 45

Flybridge Azimut Flybridge 45 Flybridge Azimut Flybridge 45

Maindeck Azimut Flybridge 45

Maindeck Azimut Flybridge 45 Maindeck Azimut Flybridge 45

Lowerdeck (2 cabins version) Azimut Flybridge 45

Lowerdeck (2 cabins version) Azimut Flybridge 45 Lowerdeck (2 cabins version) Azimut Flybridge 45

Lowerdeck (3 cabins version) Azimut Flybridge 45

Lowerdeck (3 cabins version) Azimut Flybridge 45 Lowerdeck (3 cabins version) Azimut Flybridge 45

Video

For more information, please contact our manager
Azimut 45
Azimut Yachts Russia

Other models of Flybridge collection

Available yachts of the same model

1
Azimut 45
Azimut 45
390 000
New yacht Used yacht 2012 13.78
Croatia
Special Offers Yachten zum Verkauf Ưu đãi đặc biệt YACHT CHARTER YACHT CHARTER YACHT CHARTER YACHT CHARTER