Azimut 42

Hull details 

The structural project was dimensioned using RINA standards for structural calculation. This entails more warranty about the quality of the structure, a fact that is also guaranteed by using the most developed techniques and by materials exploited. 
VINYLESTER RESIN is used for the first work layers of the whole hull. This kind of resin is extremely effective in preventing osmosis, thanks to its chemical and mechanical characteristics. On the strength of this Azimut is able to offer a 5 years guarantee against osmosis. 
Ortophthalic/DCPD resin of recognized quality is used for the remaining mill work, which uses Resin Infusion technology. In hull broadsides and on superstructures sandwich with a high-performances PVC core is used. Bulkheads are made of nautical wood and expanded material sandwich

Helm station 

• Steering wheel - Hydraulic assisted 
• Helms - NiBral 
• Bow thruster - Included in standard version 
• Flaps - Electro-hydraulic with single cilinders 

External layout
Hull

• The external painting is an Isoftalic-NPG gelcoat 

Flybridge 

• One anodized alluminum and plexiglass watertight hatch 
• Helm station is equipped with: 
• - Engines controls, with syncro function 
• - Main engines instruments:  2 Cummins multifunction displays, 2 Cummins thermometers 
• - Ignition-stop engine commands 
• - Alarm silencer command 
• - Raymarine instruments – Bronze Package 
• - Eletrical winch commands 
• - Horn command 
• - Manual searchlight (OPT: Electrical Searchlight) 
• - Flaps commands, with angle indicators 
• Single helm seat 
• Stainless steel steering wheel, with details in white plastic 
• Seats in bow area in “C” layout 
• Seats in stern área in “L” layout, with ample under seat storage 
• Optional 36 liters drawer refrigerator, installed under central seats 
• GRP Roll bar 
• Anti-slip walkway surface 
• Plexiglass windshield with stainless steel structure 
• Stainless steel handrails 
• Square opening in gray plexiglass (30x30 cm) for salon ventilation, positioned in the front flybridge area 

Bow Area, side Walkways and House 

• Stainless steel pulpit 
• Windows in laminated glass glued to the superstructures without framework, increasing aesthetics and preserving the mechanical characteristics 
• Rub-rail in stainless steel and PVC with high impact-resistance 
• Water filler at bow area 
• Fuel filler on walkway 
• Anti-slip on walkways and on the bow area 
• Window opening in helm station side (starboard) 
• Anchor winch 1000 W, 24 V with wired remote control 
• 65 meters length chain, rings of 8 mm 
• Stainless steel bow roller for anchor 
• 17kg TREFOIL anchor 
• Chain storage peak and fenders storage, with water drainage 
• Cushion for the bow solarium area, with cup holders made in transparent plexiglass
• Stainless steel bar for GRP protection when cable mooring
• Stainless steel handrail
• Stainless steel pulpit along side walkways

Cockpit and Swim Platform

• Stainless steel stairs, with Teak steps
• Two fairleads with stainless steel cleats
• Black water outlet on cockpit area, near the aft cleat (for disposal in ground structures)
• Storages with White plexiglass doors (5 in total)
• Salon door in painted alluminum, stainless steel and tempered glass (2 sliding doors and 1 fixed)
• Bench in GRP with storage under the seats
• Cushions for the cockpit bench
• Access door for machine room by a floor hatch
• Ligths for cockpit and platform area
• Stainless steel and plexiglass gate
• Stainless steel handrail on the access to the side walkways
• Stainless steel handrail on the stern of the swim platform
• Fibreglass swim platform, with hydraulic lift system
• Hot and cold water shower
• Shore power connection 30A
• Emergency telescopic stairs built-in the platform, with stainless steel handrail installed in the platform floor 
• Dimensions of swim platform: 2.85 x 0.9 m 
• Allowed lift load: 180 kg.Suggestion for boat size on swim platform: 2.8 x 1.4 m

Interiot layout

• The furniture is made of plywood suitable for marine use, with laminated type "Miele". 
• The inside of the cabin lockers is provided in raw natural cedar panels. 

Main Deck 
Salon 

• Sofa in L-shape with storage (OPT Sofa bed installed in the sofa storage) 
• Table for 6 persons, movable and foldable, wich can be used also in cockpit area 
• Cabinet in the port side 
• Pre-wiring for TV, with plug near cabinet 
• Carpet floor 
• Curtains for side Windows and main door 
• Removable floor panels, providing access for machine room maintenance 

Main Helm Station 

• Double seat, lined with leather, structure in wood 
• Storage under helm seat 
• Access handrail in stainless steel 
• Stainless steel steering wheel with details in leather 
• Carpet floor 
• Area below windshield painted with Nextel® coating 
• The helm is equipped with: 
• Engines controls, with syncro function 
• Main engines instruments: 2 Cummins Vesselview multifunction displays 
• Alarm panel (with led indicator for bilge pumps, grey water tank, high temperature in exhaust, swim platform low, shore energy plugged, inverted polarity) 
• Compass 
• Raymarine instruments – Bronze Package
• Several switches: navigation lights, horn, instruments light, winch, windscreen washer and wipers, alarm muting, bilge pumps, flaps.
• 12V socket

Lower Deck
Galley / Corridor

• Wooden floor
• Storage under galley floor
• Round openable porthole
• Galley top in beige marble
• 1 square stainless steel sink, with hot and cold water
• Glass-ceramic cooktop for two pans, with pan support
• Trash can
• Microwave 20 liters installed inside the kitchen furniture, above a sliding drawer.
• Refrigerator/freezer single door with 130 liters (OPT two doors 165 liters freezer/refrigerator) 
• Power indicator for grey water pump 
• Handrail in stairs made in stainless steel 
• Corridor that gives access to cabins and port bathroom 

Master cabin 

• Double bed 
• Shelf on headboard, with storage compartments 
• 2 reading lights 
• 2 side shelfs 
• 2 rectangular openable portholes 
• Hatch with blackout and mosquito net 
• Starboard cabinet with hangers rack 
• Drawer and storage beneath the bed 
• Carpet floor 
• Curtains 
• Halogen light spots 
• Port cabinet with hangers rack and mirror inside 

Main Head 

• Natural lightning in shower room by translucent ceiling 
• Tecma Easyfit WC 
• Flush/Do not flush Tecma indicator with red and green lights 
• Sink in Vetrofreddo® 
• Bathroom acessories in Vetrofreddo® 
• Removable teak floor in the shower room 
• Shower room with internal diameter of 750mm, with sliding plexiglass doors. 
• Shower holder with heigth adjustment 
• Cold/Hot Water mixer 
• Stainless steel towel rack 
• LED lighting above sink and halogen spots in the ceiling 
• Round openable porthole – diameter 250mm 
• Venetian blind 
• Indicator of grey water pump functioning 

Guest cabin (midship, starboard side) 

• 2 single beds, positioned longitudinally in the boat 
• Bedside table with small storage 
• 2 storage shelfs 
• LED reading lights 
• Halogen ceiling lights 
• Cabinet in the sidewall, equipped with shelfs, hangers rack and mirror. 
• Panoramic window made by 2 fixed rectangular glasses (aprox 250 x 600 mm each) in the side of the hull 
• Round stainless steel openable porthole, diam. 250mm 
• Carpet floor 
• Fabric curtains 
• Storage below the floor 

Guest head 

• Natural lightning in shower room by translucent ceiling 
• Tecma Easyfit WC 
• Flush/do not flush Tecma indicator with red and green lights 
• Sink in Vetrofreddo® 
• Bathroom acessories in Vetrofreddo® 
• Removable teak floor in the shower room 
• Shower room with sliding plexiglass doors. 
• Shower holder with heigth adjustment 
• Cold/Hot Water mixer 
• Stainless steel towel rack 
• LED lighting above sink and halogen spots in the ceiling 
• Round openable porthole – diameter 250mm 
• Venetian blind 
• Indicator of grey water pump functioning 

Electrical system
Main Characteristics 

• Voltage of 220V and 110V, 60 Hz, AC. 24 V CC (+1 12 VCC socket in the helm station) 
• Main equipments dashboard panel, located in the kitchen area 
• Main switch Shore - Generator 
• Service batteries parallel – for engine emergency start – in the helm station 
• Main battery switch is located in the cockpit area 
• Main lightning with alogen lights 28V 
• LED Reading lights in cabins 
• LED Bars for heads and main cabin 
• 110V – 60Hz plugs in all boat, except for one 220V – 60Hz plug located in the Galley 

Energy Sources 
Generator 

• Generator by Cummins-ONAN 9 kW 220 V@60 Hz, with muffler and water/gas separator 
• Cummins SmartCraft Interface to monitore function parameters from VesselView 
• Remote on-off switch located in the kitchen dashboard 
• 10A 12V Battery charger for generator battery. 
• 1 x 12VCC 100Ah Generator battery 

Shore plug 

• 1 x 220V, 60Hz, 30A shore plug positioned in port side of lifting platform 

Batteries 

• Service: Group of 4 batteries 24 VCC 100Ah 
• Engine start: Group of 2 batteries 24 VCC 100Ah 
• 50A 24V electronic battery charger

Navigation electronics 

• For the complete list of equipment and packages, please refer to the Optionals List. 

Bilge pumps 

• 2 electrical 24V bilge pumps located in the aft side of the machine room 
• Level alarm 
• 2 manual emergency pumps, one in engine room and other in the guest cabin 
• Engine room bilge rapid exhaustion from engine 

Fuel system

• Two polyetilene 550 liters tanks, located in the engine room 
• Electronic indicator in the wheelhouse direct in the Cummins VesselView 
• Visual indicator located in the port tank 
• Solenoid valves control the fuel feeding to engines 
• Interconnected tanks, with manual valve 

Fresh water system 

• 2 polyetilene tanks provide a total 400 liters fresh water 
• 17 l/min water pressure pump 
• Tecma WC cleaning system connected to fresh water 
• 40 l water heater 
• Tank level electronic indicator in the wheelhouse 
• Automatic pump shut down in case of end of water 

Black water system

• 2 Tecma Easyfit WC with incorporated macerator pump 
• 103 liter tank, with external level sensor, wich activates flush block when tank is full 
• Medium and high level sensor with visual state indicator located in WC buttons, in the bathrooms 
• Possibility to empty the black water tank through the suction nozzle installed in the deck 
• Possibility to discharge into the sea by three-way valves installed below the grey water drop box (operation that can be performed where and when permitted by applicable law) 

Grey water system

• Grey water collector tank of 40 l of polyethylene, with automatic discharge of gray water from bathrooms, showers, sinks 
• Galley sink discharge directly on the hull side 
• Level automatic switch, buoy made in stainless steel with double contact (activation of automatic pump - High level alarm collector tank)
• Switch / operating mode selector: manual / automatic pump in the main panel
• Discharge pump at sea: 25 l / min.
• Delivery of condensation of water from the refrigerator and air-conditioning installation
• Anti-odor discharge siphons.

Engine exhaust system

• Snorkled engines exhaust
• Stainless steel exhaust pipes
• Integrated muffler to make engines exhaust silent
• Minimum exhaust

Ventilation system 

• Natural ventilation through tubes positioned in the hull sides, protected by an external stainless steel grid 
• Air extraction by an extractor 24 V, with automatic start and “later” stop (several minutes after engine is shut down) 
• Hydraulic system 
• A 24V electro-hydraulic junction box for flaps 

Miscelaneous

• 1 half sailor 
• 6 (six) fenders 
• 6 (six) fenders covers 
• Mooring lines (4 pieces of 10 meters each, diameter 20 mm) 
• Fender lines (6 pieces of 3 meters each, diameter 8 mm)